Radial Engineering
Radial Reamp HP Compact Reamper
Radial Reamp HP Compact Reamper
Couldn't load pickup availability
The Radial Reamp HP takes the signal from a headphone output on an audio interface or a mobile device and converts it to feed mono guitar amps and effects pedals for Reamping.
Assign the track you want to Reamp to the right channel of your headphone output and you can feed guitar, bass, or even vocal tracks through an amplifier without repatching the outputs on the back of your interface. A mono switch can also sum a stereo track down. Both 1/4" and 3.5 mm inputs are provided, so a smartphone or tablet can be used as well.
An isolation transformer and ground-lift switch help eliminate hum and buzz, and a level control lets you fine-tune the output into amps and pedals.
Features
- Play prerecorded tracks through amps and pedals
- Easily Reamp from any interface or playback device
- 1/4" and 3.5 mm inputs connect to a headphone output
- Transformer isolated for low-noise recordings
- Mono sum switch, ground lift, and level control
- Passive design — no power required
Specifications
| Audio circuit | Passive, transformer isolated |
|---|---|
| Frequency response | 20 Hz – 20 kHz (± 0.5 dB) |
| Dynamic range | > 96 dB |
| Total harmonic distortion | 0.0015% @ 1 kHz |
| Input impedance | 11.8 kΩ |
| Output impedance | 1.5 kΩ |
| Maximum input | > +20 dBu |
| Inputs | 1/4" TRS and 3.5 mm TRS unbalanced stereo |
| Output | 1/4" TS |
| Power | Passive, no power required |
| Construction | 16-gauge steel chassis and outer shell |
| Size | 4.6" x 1.50" x 1.89" (117 x 48 x 38 mm) |
| Weight | 0.58 lb (256 g) |
| Warranty | Radial 3-year, transferable |
Specifications from Radial Engineering. Subject to change without notice.
Share



